关闭列表

设备文本介绍:↓

优质是其根本

●主传动通过王轴，传动直径0250毫米的滚盘带动锭子运转。中墙板采用框式结构，【型龙筋，角尺型短机粱，紧凑稳固机架重心低，可适应各种升降动程。

●能生产预定纱线长度的优质管纱，升降杠杆采用蜗轮箱传动单叶成形凸轮，凸轮的形状使管纱成形

能适应自动络筒机的高速退绕。

●牵伸结构卷与绕结构是经过大量科学实验的最优化设计。雏生产最好的纱线，最少断头率。在适纺

纤维种类和纤维长度方面通用l生强，范围大。

●各种国产棉型摇架厦SKF摇架、l NA与RIETER气加压摇架均可配套的牵伸系统．并可选配清洁前罗拉

的磁性绒辊，选用锭盘直径m 22mm或tl- 20 5mm的

ITS  PRINCIPAL-HIGH  QUALITY

●For main driving the tension pulley with diameter of 250mm which is driven by the mainshaft is to drive the spindles to run. The spring piece adopts a frame-type design,【-shape  short splndle rail and angle square-type short roller stand. which is compact and stable,with a low center of gravity suitable for all kinds of lifting motions.

●Able to produce excellent cops for presetting length. As for lifting lever. worm wheel box is used to drive the single builder cam, whose shape makes the cop formation suitable for the high-speed unwinding of automatic conewinder.

●The drafting and winding construction is the optimal design through lots of scientific

experiments it can produce the best yarn with the lowest breakage. it is versatile andwidelyused with respect to spinnable fibre type and fibre length

●      Its drafting system can be equipped with all kinds of stateproduce cotton type pendulumarms. SKF. INA and RIETRER pendulum arms Magnetic clearing roll can also be selectedto clean the front roller it is optional to use the low-noise power-saved spindle with thespindle wharve diameter of 22mm or205mm

高效是其目标

●机身窄，左右锭子中心距680毫米，空间利用率大。

●FA/FB507型细纱机除了有可的工艺性来保证纱线质量外，其制造陛同样是精良的。传动齿

轮均采用优质钢。高速级传动采用同步齿形带，安装方便，噪音低。牵伸传动齿轮采用斜齿，平

稳可靠。

●采用高强度平皮带传动主轴，配用变频器调节锭速。可选用6/4极双速高效节能电机。

●根据粗纱卷装大小，可选配单层四排（适应粗纱最大直径0 1 3 5毫米）或单层六排（适应粗纱最

大直径d.152毫米）的纱架。

●风箱密封性能好。

ITS  OBJECTIVE-HIGH  EFFICIENCY

●Narrow machine width. the distance betweenthe centers of the two opposite spindles on

either side of the machine is 680mm, whichutilize the space effectively.

●Besides the reliable technology to ensure theyarn quality, the ring spinning frame is

exquisitely manufactured. High-quality steel isadopted for all driving gears of overall

machine For high speed driving.Helical timingbelt is used lo ensure convenient erection and

low noise Helical gears are chosen for draftingand driving gears, which make them stable and

reliable

●Use high-tension flat belt to drive the main shaft. equip it With inverters to adjust spindle

spaed. choose to equip it with 6;4 polesdoublespeed high-efficiency motor which

saves power

●According to the roving package size.chooseto equip single-layer 4-row creel(suitable for

roving with max dia of 135mm) or single-layer6-row creel (suitable for roving whith max. dia

Of 152mm)

●Suction box sealed well by silica gel

自动化程度

●最早采用国际先进水平的程序控制器及变频速器。

●运转中能数字显示前罗拉线速度、锭速、捻度、定长和班产。

●纺纱过程中任何时候关机，能自动适位停机。

●需要时，可使钢领板提前自动下降及自动适位停机。

●纺纱至规定纱线长度时，可使钢领板自动下降及自动适位停机。

●开机前能使钢领板自动复位：

●在纺纱过程中，可自动变速，亦可手动变速。

●配用电动落纱机，落纱前能自接通落纱机电源．，

HIGH  AUTOMATION

●First adopt the internationally advanced programme controller and the speed-adjusting inverter

●While the machine is running. digital  display can show the linear speed of front roller, spindle speed, twist range.presetting length and shift output

●The frame can stop at a praper position automatically, whenever lt is required  during the spinning process

●If needed. the r Jng rail can wing down  automatically in advance and the machine can stop automatically ata proper position

●When  spinning  the  yarn  to the  presetting length. the ring rail will wing  down and stop automatically at a proper pasition

●Before starting the machine, the ring  rails W…reset themselves at the sta rting position automatically

●During spinning process, the spindle speed can be changed automatically or manually

●Equipped with auto-doffer, the power supply will be put through automatically before doffing

操作与管理可

●车头传动及牵伸传动，有滴浊润滑装置进行定时定量滴油，保证机器正常远转。

●传动齿轮采用统一模数、孔径和宽度，各种变换齿轮互相间可通用，减少了备用齿轮的品种和数量。

●有适用于棉型笛管和适用于中长纤维支管的断头吸入装置。

●各种控制与操作开关，集中于车头面板上。

●车头与车尾比机身窄使用电动蓓纱机时毋需预拔纱管

Operation and management

●To ensure tha normal running ofthe frame, the driving and fixed time by the lubrication system

●Change gears for drafting,twisting,and winding are of the same modula.bore diameter and width. and therefore

spare gears.

●Equipped with the broken yarn and suction device,which can borh fit to cottoh-type flute and fibre Sub-pipe

●All the conrtolling and operating buttons are concentrated on the pannei of the headstock.

●Since both the headstock and the endstock are more narrow Than the middle portion,it is unnecessary to pull out the bobbins

in advance befora auto-doffing

技术参数/Main   spcifications

机器底脚图/Floor space of the machine

设备文本介绍:↓

优质是其根本

●主传动通过王轴，传动直径0250毫米的滚盘带动锭子运转。中墙板采用框式结构，【型龙筋，角尺型短机粱，紧凑稳固机架重心低，可适应各种升降动程。

●能生产预定纱线长度的优质管纱，升降杠杆采用蜗轮箱传动单叶成形凸轮，凸轮的形状使管纱成形

能适应自动络筒机的高速退绕。

●牵伸结构卷与绕结构是经过大量科学实验的最优化设计。雏生产最好的纱线，最少断头率。在适纺

纤维种类和纤维长度方面通用l生强，范围大。

●各种国产棉型摇架厦SKF摇架、l NA与RIETER气加压摇架均可配套的牵伸系统．并可选配清洁前罗拉

的磁性绒辊，选用锭盘直径m 22mm或tl- 20 5mm的

ITS  PRINCIPAL-HIGH  QUALITY

●For main driving the tension pulley with diameter of 250mm which is driven by the mainshaft is to drive the spindles to run. The spring piece adopts a frame-type design,【-shape  short splndle rail and angle square-type short roller stand. which is compact and stable,with a low center of gravity suitable for all kinds of lifting motions.

●Able to produce excellent cops for presetting length. As for lifting lever. worm wheel box is used to drive the single builder cam, whose shape makes the cop formation suitable for the high-speed unwinding of automatic conewinder.

●The drafting and winding construction is the optimal design through lots of scientific

experiments it can produce the best yarn with the lowest breakage. it is versatile andwidelyused with respect to spinnable fibre type and fibre length

●      Its drafting system can be equipped with all kinds of stateproduce cotton type pendulumarms. SKF. INA and RIETRER pendulum arms Magnetic clearing roll can also be selectedto clean the front roller it is optional to use the low-noise power-saved spindle with thespindle wharve diameter of 22mm or205mm

高效是其目标

●机身窄，左右锭子中心距680毫米，空间利用率大。

●FA/FB507型细纱机除了有可的工艺性来保证纱线质量外，其制造陛同样是精良的。传动齿

轮均采用优质钢。高速级传动采用同步齿形带，安装方便，噪音低。牵伸传动齿轮采用斜齿，平

稳可靠。

●采用高强度平皮带传动主轴，配用变频器调节锭速。可选用6/4极双速高效节能电机。

●根据粗纱卷装大小，可选配单层四排（适应粗纱最大直径0 1 3 5毫米）或单层六排（适应粗纱最

大直径d.152毫米）的纱架。

●风箱密封性能好。

ITS  OBJECTIVE-HIGH  EFFICIENCY

●Narrow machine width. the distance betweenthe centers of the two opposite spindles on

either side of the machine is 680mm, whichutilize the space effectively.

●Besides the reliable technology to ensure theyarn quality, the ring spinning frame is

exquisitely manufactured. High-quality steel isadopted for all driving gears of overall

machine For high speed driving.Helical timingbelt is used lo ensure convenient erection and

low noise Helical gears are chosen for draftingand driving gears, which make them stable and

reliable

●Use high-tension flat belt to drive the main shaft. equip it With inverters to adjust spindle

spaed. choose to equip it with 6;4 polesdoublespeed high-efficiency motor which

saves power

●According to the roving package size.chooseto equip single-layer 4-row creel(suitable for

roving with max dia of 135mm) or single-layer6-row creel (suitable for roving whith max. dia

Of 152mm)

●Suction box sealed well by silica gel

自动化程度

●最早采用国际先进水平的程序控制器及变频速器。

●运转中能数字显示前罗拉线速度、锭速、捻度、定长和班产。

●纺纱过程中任何时候关机，能自动适位停机。

●需要时，可使钢领板提前自动下降及自动适位停机。

●纺纱至规定纱线长度时，可使钢领板自动下降及自动适位停机。

●开机前能使钢领板自动复位：

●在纺纱过程中，可自动变速，亦可手动变速。

●配用电动落纱机，落纱前能自接通落纱机电源．，

HIGH  AUTOMATION

●First adopt the internationally advanced programme controller and the speed-adjusting inverter

●While the machine is running. digital  display can show the linear speed of front roller, spindle speed, twist range.presetting length and shift output

●The frame can stop at a praper position automatically, whenever lt is required  during the spinning process

●If needed. the r Jng rail can wing down  automatically in advance and the machine can stop automatically ata proper position

●When  spinning  the  yarn  to the  presetting length. the ring rail will wing  down and stop automatically at a proper pasition

●Before starting the machine, the ring  rails W…reset themselves at the sta rting position automatically

●During spinning process, the spindle speed can be changed automatically or manually

●Equipped with auto-doffer, the power supply will be put through automatically before doffing

操作与管理可

●车头传动及牵伸传动，有滴浊润滑装置进行定时定量滴油，保证机器正常远转。

●传动齿轮采用统一模数、孔径和宽度，各种变换齿轮互相间可通用，减少了备用齿轮的品种和数量。

●有适用于棉型笛管和适用于中长纤维支管的断头吸入装置。

●各种控制与操作开关，集中于车头面板上。

●车头与车尾比机身窄使用电动蓓纱机时毋需预拔纱管

Operation and management

●To ensure tha normal running ofthe frame, the driving and fixed time by the lubrication system

●Change gears for drafting,twisting,and winding are of the same modula.bore diameter and width. and therefore

spare gears.

●Equipped with the broken yarn and suction device,which can borh fit to cottoh-type flute and fibre Sub-pipe

●All the conrtolling and operating buttons are concentrated on the pannei of the headstock.

●Since both the headstock and the endstock are more narrow Than the middle portion,it is unnecessary to pull out the bobbins

in advance befora auto-doffing

技术参数/Main   spcifications

机器底脚图/Floor space of the machine